Product: Pressure Vessels and Boilers Plate
Kategori: High Tensile Steel Plate
Grades : A-516 Gr.70
Standard: ASTM/ ASME
Place of Origin: Indonesia
ASTM A285| ASME SA285 | ASTM A537 | ASME SA537 | EN 10028 | BS 1501 | DIN 17155 | Cryogenic Steel
Beyond-steel provide high tensile carbon steel plate according to ASTM A516 Grade 70 and ASME SA516 Grade 70 for boiler and pressure vessel fabrication of the oil, gas and petrochemical industry.
ASTM A-516 standard is primarily used in welded pressure vessels where improved notch toughness is required. The steel plates allow four different strength levels 55, 60, 65 & 70 and the most common is grade 70. This grade is made to a fine grain particle size to meet the requirement of varied industry applications. ASTM A-516 Gr.70 steel plates are HIC tested.
High tensile strength
Thickness: 8 – 65 mm
Size: 1524 x 6096 mm or 5 x 20ft
1829 x 6096 mm or 6 x 20ft
Tabel Ukuran & Berat Plat ASTM A-516 Gr.70
|Product||Thickness (Inch)||Size (Feet)||Weight (Kg)|
|Plat A516 5mm||3/16″||5′ x 20′||347|
|Plat A516 6mm||1/4″||5′ x 20′||463|
|Plat A516 8mm||5/16″||5′ x 20′||579|
|Plat A516 10mm||3/8″||5′ x 20′||694|
|Plat A516 12 mm||1/2″||5′ x 20′||926|
|Plat A516 14 mm||9/16″||5′ x 20′||1042|
|Plat A516 16mm||5/8″||5′ x 20′||1158|
|Plat A516 19 mm||3/4″||5′ x 20′||1389|
|Plat A516 25 mm||1″||5′ x 20′||1852|
|Plat A516 38 mm||1.5″||5′ x 20′||2824|
|Plat A516 45 mm||1.75″||6′ x 20′||4012|
|Plat A516 50 mm||2″||6′ x 20′||4458|
|Plat A516 60 mm||2.375″||6′ x 20′||5351|
|Plat A516 65 mm||2.625″||6′ x 20′||5695|
For plates < 40mm (thinner), normally supply as rolled. Plates supplied > 40mm (above) thick are normalised.
Thickness above 65mm indent 6 – 8 weeks with minimum order
Chemical Composition (%)
Tensile strength (MPa) : 485-620
Yield strength (MPa) : 260
Elongation in 200mm (min)(%): 17
Elongation in 50mm (min) (%): 21
Thickness (max)(mm) : 205
ASTM A-516/SA516 normalized products can be welded using a low-hydrogen electrode and Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW) or Submerged Arc Welding (SAW) processes. It is recommended that welding be conducted in accordance with the aplicable ASME/AWS codes.
Because the normalizing process results in a homogenous, fine-grained ferritic microstructure, plates produced by this process exhibit excellent formability.
Boilers and pressure vessel fabrication of the oil, gas and petrochemical industry.
ASTM A516 Gr.55 | ASTM A516 Gr.60 | ASTM A516 Gr.65 | ASTM A516 Gr.70 | ASME SA516 Gr.70
|Steel Plate Product:|